X

Clever Drop Sprinkler

Proudly Australian Made And Owned

Clever Drop Sprinkler

If you like your Wobble-Tee you will love the Clever Drop

Clever DropGetting Started

The Clever Drop Sprinkler is flat packed to protect the moving parts during distribution. To get started, simply cut the cable ties, gently flex the base and rotate the sprinkler to upright position and ensure the teeth are correctly engaged as you release the base. 


Clever Drop Add On Ability Pressure Regulating DiscsAdd-On-Ability

Removable end cap allows for an additional hose connector to be added to the base, enabling the operation of multiple sprinklers from just one tap.  

Pressure Regulating Discs

Four discs of varying sizes are provided for use in areas of high water pressure to control smaller watering diameters and ensure a consistently even distribution of water. These can be easily inserted under the removable sprinkler top. Diameters may vary with different water pressures.

Size of disc used

1.25mm disc

1.5mm disc

1.75mm disc

2.0mm disc

Without disc

Watering diameter

1.5m to 3.0m

2.5m to 4.0m

3.5m to 5.0m

4.5m to 6.0m

Effective up to 8m

Approx. litres/min

2.5

3.0

3.5

4.5

6.5


Adjustable Angle Base

The upright operating position can be adjusted for use on uneven surfaces, such as tiered gardens. Gently flex the side skids of the sprinkler base downward and rotate the centre turret to the desired position, then ensure the teeth are correctly engaged as you release the sled base.

Purpose Shaped Base

Purpose Shaped BasePurpose Shaped BaseUse for roof cooling on sheds and bird aviaries.

For a temporary application just run the hose over the roof peak and the sprinkler sits vertically on the corrugated iron.

For permanent installation run the sprinklers and hose across the corrugated iron securing the sprinkler through the holes provided using the existing roofing teck screws. Use 20mm metal pipe saddles to hold the hoses in place using the existing roof screws.

Clever Drop Brochure

 Back to Top